Aux / Cue Sends – AWX

Overview

The AWX has 4 mono aux sends and 2 dedicated stereo cue sends.

Send Master Gains
Stereo Return
FX Sends

Usage

Aux 1 & 3 share a gain knob. 2 & 4 share a gain knob. Cues A & B also share a knob for gain and knob for panning. The sends can be enabled with the toggle switches beside the knobs.

Master Gains

Each of the Aux & Cue sends has a dedicated master gain before reaching their output.

Adding Effects

Continuing from the Aux Masters, use the patchbay to route signal from the Aux Master output to a desired time-based audio effect such as reverb or delay.

A mono aux only needs one signal to feed the L-input of an audio device. All time-based effects in SoundcheckPro have a Mono to Stereo switch to allow mono signals to be balanced for stereo effects.

Don’t Forget to POWER the external device!

Stereo Returns

  • Patch both of the L & R outputs of the audio effect device into the STEREO RETURNS 1 or 2.
  • Raise the Stereo Return to LR/Main Mix.

Alternatively, they can also be returned on open mixer channels if desired. Explore the other Stereo Returns and their routing capabilities!

Monitor Cues

Preview the Cue Mixes using the Monitor Source Select in the Master Section.

Was this article helpful?
Dislike
In this article