Zedd – Bus Groups

Overview

The Bus Outputs are located at the top of the channel strips. They serve multiple purposes ranging from subgrouping and routing to a multitrack recorder.

Track Bus Master
Track Busses
Dynamic Slot 1 & 2
  • 4 bus outputs
  • Pre – Enables pre fader listen for bus outputs
  • Pan – Makes it that the stereo information from the channel fader passes the Left signal to the ODD busses and the Right signal to the EVEN busses. *Useful for keeping pan information when grouping drums!*

Steps

  1. Assign Bus
  2. Raise Bus Master
  3. Use Patchbay to route to a dynamic processor
  4. Patch output of dynamic processor to an open channel

Use Cases

  • Subgroups
  • Parallel Processing
  • Routing to MTR
  • Duplicating signals

Was this article helpful?
Dislike